|
|
Life management of power oil transformer
Čechová, Karolína ; Froehling, Kenneth (referee) ; Sedláček, Pavel (advisor)
Pro pochopení významu procesu řízení životnosti výkonových olejových transformátorů, je nutné si nejdříve uvědomit jejich roli v elektrizační soustavě. Používají se především ke zvýšení a snížení napěťových úrovní v přenosové a distribuční soustavě dle aktuálních potřeb. Nespolehlivost výkonových olejových transformátorů může způsobit narušení stability dodávky elektrické energie, což představuje značné finanční a technické ztráty pro společnosti, které spravují tento typ zařízení. Z tohoto důvodu jsem se rozhodla napsat práci, která poskytuje přehled o procesu řízení životnosti, popsáním jeho ekonomických přínosů spolu s technickými diagnostikami, které napomáhají ke zjištění vznikajících poruch během provozu výkonových olejových transformátorů. Hlavním záměrem této práce je popsat a dokázat důležitost procesu řízení životnosti a využití diagnostických metod ke sledování parametrů transformátoru, které slouží jako prostředek ke zjištění možných poruch. Praktická část je zaměřena na navržení vhodných diagnostickým metod pro měření zvolených parametrů vybraného výkonového olejového transformátoru. Poté je provedena analýza zvolených parametrů a na základě jejích výsledků, je určen celkový stav vybraného výkonového olejového transformátoru.
|
|
|
Contribution to the Evaluation of Dissolved Gas Analysis in Power Oil Transformer Diagnosis
Ministr, Martin ; Szabó,, Radek (referee) ; Kratochvíl, Petr (referee) ; Hammer, Miloš (advisor)
This dissertation thesis is focused on the evaluation of the dissolved gas analysis in the power oil transformer diagnosis. This thesis derives from known, in standards, directives and literature shows realities which are fill in new pieces of knowledge as determining of gases important for evaluation of the transformer condition, specifying of current methods accuracy and investigating of accuracy change for interpretation of dissolved gases. The part of this thesis is the application of mathematic methods for detailed description of individual transformer failures and determining of dominant gas which are generating in power oil transformer. Obtain conclusion will be contribution for transformer diagnostics and will be applicable in industrial practice.
|
|
|
Failure analysis of oil transformers
Knebl, Jan ; Distribuce, Ivan Mikulášek, ČEZ (referee) ; Dohnal, Petr (advisor)
The present thesis deals with power transformers, oil and dry, their properties and structures, and subsequently faults that occur in oil transformers. First, the disorders discussed in general and then a comparison of individual samples transformer failures that have occurred in recent years in the Moravian-Silesian and Olomouc regions. Finally, I analyze the failures and the most common encountered, I suggested solutions to reduce their incidence.
|
|
|
Reliability of Power Oil Transformers
Ertl, Jakub ; Szabó,, Radek (referee) ; Kratochvíl, Petr (referee) ; Hammer, Miloš (advisor)
The doctoral thesis deals with design of non-invasive methods for estimated reliability analysis of power oil transformers. Such procedures also solve two-state and multistate reliability problems together with applying of gained reliability characteristics in planning further operation of these non-rotating electrical machines. Reliability module for diagnostic system, which is developed at the training workplace, is designed in conclusion of this thesis. All the above procedures were verified on data obtained from diagnostic measurements of ten power oil transformers operating in different power plants in the Czech Republic.
|
|
|
Progress Prediction of Diagnostic Quantities
Akhmadishina, Alina ; Hammer, Miloš (referee) ; Ertl, Jakub (advisor)
The work deals with the analysis of time series of diagnostic quantities measured in power oil transformers. The first part includes power oil transformers and the description of diagnostic variables that are measured inside these non-rotating electrical machines. The next section introduces the decomposition model of time series including analysis of all its components. The last part deals with the predictions of the likely survival time of power oil transformers operating in different power plants in the Czech Republic.
|
|
|
Contribution to the Diagnosis of Power Oil Transformers
Šimková, Martina ; Poliak,, Ján (referee) ; Szabó, Radek (referee) ; Hammer, Miloš (advisor)
This dissertation thesis deals with the diagnotics of power oil transformer. It consists of the theoretical and practical part At its beginning, the theoretical part deals with an general description of the transformer and its connection. Focus is given to aspects of the life of the transformer insulation system (oilpaper). Further, the technical diagnostics is analyzed, with description of quantities of gasliquid chromatography, the oil condition and condition of conductor insulation. Another important part of the thesis consists of an expert system, which is described generally from the past to the present. Characteristics, types and structure of expert systems are mentioned here, with its advantages and disadvantages. The practical part starts with a description of the data file, which is further used in the thesis. Main practical part is divided into three parts - the results of gas-liguid chromatography, selected results and expert systems. In the section entitled "Results of gasliquid chromatography", there is an analysis of selected properties of time series and temperature dependency of gases. Moreover, the methods of the ratios of gases such as Duval Triangle method are described. The second part entitled "Selected other results" shows the time dependency of variables and the neutralization number, along with the breakdown voltage dependency, and time of dependency, gas and moisture content in insulating oils. There is also a temperature dependency of moisture content dissolved in insulating oil discussed, as well as results of selected correlations, such as the correlation values of gas chromatography with state variables insulation of wires. The last part, "Expert systems", provides specific information about developed expert system. It describes the environment chosen for its development, followed by a description, features and verification of the expert system. Examples of the consultation results are included. All achievements of the individual parts are always summarized at the end of each section. The thesis contains chapters "Objectives of the work" and "Conclusion". The most important chapter is "The contribution of the work." It contains original work results and the results applicable in industry.
|
|
|
Artificial Intelligence in Power Oil Transformers Diagnostics
Janda, Ondřej ; Szabó,, Radek (referee) ; Kratochvíl, Petr (referee) ; Hammer, Miloš (advisor)
This dissertation thesis deals with the application of expert systems and soft computing methods in field of power oil transformers. The main work is divided into theoretical and practical part. First, the theoretical part presents the basic elements of the transformer, and approaches to its diagnosis. The work focused mainly on the diagnostics of the insulation system, and diagnostic methods and approaches in this specific area. Next part describes the basics of expert systems and other soft computing methods such as: fuzzy logic, neural networks, genetic algorithms and their combinations and extensions. At the end of the theoretical part, the possibility of optimization approaches by means of artificial intelligence and its application in fuzzy model optimization are described. The practical part begins with description of the used data file that runs through the entire work. The work is then divided into four parts, namely in parts which deal with the expert system for transformer diagnostics, DGA module, prediction module, and optimization using artificial intelligence. The section describing the expert system gives specific information about the particular expert system. The means and techniques used for constructing given system are described, and then the complete system design and description of all subsystems and modules are presented. The next section describes the developed DGA module and all selected approaches to its implementation and expansion. At the end of the chapter, the results of comparison between all implemented methods are evaluated. The third part deals with the prediction module and describes its design and construction, including description of the main parts which are based on the selected predictive approaches. Also, the predictions of selected quantities from the data file are included. There are two predictive approaches being used: the one step prediction, and the multiple step prediction. The comparison of prediction accuracy and computational cost of given methods is presented at the end of this chapter. The last part deals with the possibilities of optimization using artificial intelligence methods, namely differential evolution, PSO, and genetic algorithms. Both the single-objective and the multi-objective optimization are considered. The methods are compared in a series of synthetic tests and then applied to optimize the fuzzy models of DGA tests from an earlier part of this work. The dissertation also includes chapters: "The Aims", "The Contribution of the Work", and a list of publications, products, and projects of the author.
|
|
|
Life management of power oil transformer
Čechová, Karolína ; Froehling, Kenneth (referee) ; Sedláček, Pavel (advisor)
Pro pochopení významu procesu řízení životnosti výkonových olejových transformátorů, je nutné si nejdříve uvědomit jejich roli v elektrizační soustavě. Používají se především ke zvýšení a snížení napěťových úrovní v přenosové a distribuční soustavě dle aktuálních potřeb. Nespolehlivost výkonových olejových transformátorů může způsobit narušení stability dodávky elektrické energie, což představuje značné finanční a technické ztráty pro společnosti, které spravují tento typ zařízení. Z tohoto důvodu jsem se rozhodla napsat práci, která poskytuje přehled o procesu řízení životnosti, popsáním jeho ekonomických přínosů spolu s technickými diagnostikami, které napomáhají ke zjištění vznikajících poruch během provozu výkonových olejových transformátorů. Hlavním záměrem této práce je popsat a dokázat důležitost procesu řízení životnosti a využití diagnostických metod ke sledování parametrů transformátoru, které slouží jako prostředek ke zjištění možných poruch. Praktická část je zaměřena na navržení vhodných diagnostickým metod pro měření zvolených parametrů vybraného výkonového olejového transformátoru. Poté je provedena analýza zvolených parametrů a na základě jejích výsledků, je určen celkový stav vybraného výkonového olejového transformátoru.
|
|
|
Reliability of Power Oil Transformers
Ertl, Jakub ; Szabó,, Radek (referee) ; Kratochvíl, Petr (referee) ; Hammer, Miloš (advisor)
The doctoral thesis deals with design of non-invasive methods for estimated reliability analysis of power oil transformers. Such procedures also solve two-state and multistate reliability problems together with applying of gained reliability characteristics in planning further operation of these non-rotating electrical machines. Reliability module for diagnostic system, which is developed at the training workplace, is designed in conclusion of this thesis. All the above procedures were verified on data obtained from diagnostic measurements of ten power oil transformers operating in different power plants in the Czech Republic.
|
|
|
Artificial Intelligence in Power Oil Transformers Diagnostics
Janda, Ondřej ; Szabó,, Radek (referee) ; Kratochvíl, Petr (referee) ; Hammer, Miloš (advisor)
This dissertation thesis deals with the application of expert systems and soft computing methods in field of power oil transformers. The main work is divided into theoretical and practical part. First, the theoretical part presents the basic elements of the transformer, and approaches to its diagnosis. The work focused mainly on the diagnostics of the insulation system, and diagnostic methods and approaches in this specific area. Next part describes the basics of expert systems and other soft computing methods such as: fuzzy logic, neural networks, genetic algorithms and their combinations and extensions. At the end of the theoretical part, the possibility of optimization approaches by means of artificial intelligence and its application in fuzzy model optimization are described. The practical part begins with description of the used data file that runs through the entire work. The work is then divided into four parts, namely in parts which deal with the expert system for transformer diagnostics, DGA module, prediction module, and optimization using artificial intelligence. The section describing the expert system gives specific information about the particular expert system. The means and techniques used for constructing given system are described, and then the complete system design and description of all subsystems and modules are presented. The next section describes the developed DGA module and all selected approaches to its implementation and expansion. At the end of the chapter, the results of comparison between all implemented methods are evaluated. The third part deals with the prediction module and describes its design and construction, including description of the main parts which are based on the selected predictive approaches. Also, the predictions of selected quantities from the data file are included. There are two predictive approaches being used: the one step prediction, and the multiple step prediction. The comparison of prediction accuracy and computational cost of given methods is presented at the end of this chapter. The last part deals with the possibilities of optimization using artificial intelligence methods, namely differential evolution, PSO, and genetic algorithms. Both the single-objective and the multi-objective optimization are considered. The methods are compared in a series of synthetic tests and then applied to optimize the fuzzy models of DGA tests from an earlier part of this work. The dissertation also includes chapters: "The Aims", "The Contribution of the Work", and a list of publications, products, and projects of the author.
|
guest ::
